$99flush
Tanked water heater flush
- Tanked units only
- Clears sediment buildup
- Helps it run efficiently
*Tanked water heaters only. Some restrictions may apply.
Open now · 24/7 across North Dallas
Get your hot water back fast with honest repair-or-replace advice, upfront pricing and licensed plumbers who know North Texas hard water.
Quick check
Tap anything you’ve noticed at home. If a few of these sound familiar, it’s time for a licensed plumber to take a look.
The bluefrog way
Licensed plumbers, a free diagnostic and an upfront price you approve before we start. Every time.
$99flush
*Tanked water heaters only. Some restrictions may apply.
We test the burner or elements, thermostat, valves and venting first, and only recommend a new heater when another repair would not be good value.
You see the price for each option before work starts, including code items like drain pans, venting changes or an expansion tank your install may need.
North Texas water is mineral heavy, so we flush sediment, check the anode rod and set up maintenance that helps your new or existing heater last.
How it works
A licensed plumber checks the tank, burner or elements, venting, relief valve and connections, then explains what failed and why in plain language.
You get a clear price for repair and, when it makes sense, for replacement, so you can choose the right option before any work begins.
We replace the failed part, or remove the old heater and install the new one with proper gas or power, water connections, venting and code-required safety items.
We fill and purge the tank, check for leaks, confirm temperature and relief valve operation, haul away the old unit and show you the shutoffs.
The complete guide
When the water heater quits, the whole house feels it: cold showers, dishes piling up and laundry on hold. bluefrog Plumbing + Drain of North Dallas repairs, replaces and installs gas and electric water heaters for homes and businesses from Denton to Richardson. Our licensed plumbers start with a free diagnostic, explain exactly what failed and give you an upfront price before any work begins. If a repair will do the job, we’ll tell you. If replacement is the smarter move, we’ll show you why.

Many water heater problems come down to a single worn part. Our trucks carry common parts, so many repairs can be finished on the first visit. These are the issues we see most often across North Dallas.
On a gas heater, the usual suspects are the pilot assembly, thermocouple or flame sensor, gas control valve or a blocked burner. On an electric heater, we check for a tripped high-limit switch, failed heating elements, faulty thermostats or a breaker problem.
A layer of sediment at the bottom of the tank takes up space and insulates the water from the burner. A broken dip tube, a failed lower element on an electric unit or a heater that was undersized for the household can all cause the same complaint.
Not every puddle means a dead heater. Leaks from the temperature and pressure relief valve, the drain valve or the supply connections are usually repairable. Water seeping from the tank itself, however, means the inner lining has corroded through, and the heater needs to be replaced.
Popping and rumbling are classic signs of hardened sediment. A rotten-egg smell from the hot side usually points to a reaction with the anode rod, and rusty hot water can mean the anode is used up and the tank has started to corrode.
We give you an honest recommendation, not a sales pitch. Repair usually makes sense when the heater is relatively young, the tank is sound and only one component has failed. Replacement is often the better value when:
You can usually find the manufacture date on the rating plate. If you’re not sure how to read it, our plumber will check it during the diagnostic and factor it into the recommendation.
A good installation is about more than swapping one tank for another. We size the new heater to your household, then make sure the install meets current code and is set up to last.
Most North Dallas homes with natural gas service use gas water heaters, which recover quickly after heavy use. Electric heaters are simple and don’t need venting, but they usually recover more slowly. In most cases it makes sense to stay with the fuel type you already have. Switching can require new gas piping, venting or electrical work, and we’ll explain what’s involved before you decide.
In many DFW homes the water heater sits in the garage or the attic. Gas heaters in garages generally need to be elevated to keep the burner away from fuel vapors, and attic heaters need a properly drained pan so a future leak doesn’t come through the ceiling. We check venting, the relief valve discharge line, gas connections, combustion air and whether your system needs a thermal expansion tank.
Tankless heaters deliver hot water on demand and free up floor space, but they often need gas line, venting or electrical upgrades. If you’re weighing the switch, read about our tankless water heater installation and we’ll compare both options side by side at your home.
Water across the North Dallas area is moderately hard to hard, which means it carries dissolved calcium and magnesium. When water is heated, those minerals settle out as sediment. Over time that sediment makes the burner work harder, causes noise and can shorten the life of the tank.
A professional flush drains the tank and clears out loose sediment. During the same visit we can inspect the anode rod, the sacrificial part that corrodes so the tank doesn’t, and replace it when it’s worn. For homes with hard water, we generally suggest a yearly flush and inspection.
If you see white scale on faucets and showerheads, the same minerals are building up inside your heater. A water softener reduces scale throughout the house and can help both tank and tankless heaters run more efficiently.
Our plumbers handle water heater repair and replacement in Frisco, McKinney, Lewisville, Carrollton, Flower Mound and the surrounding area, including Plano and Denton, where our shop is located. If a heater is actively leaking, our emergency plumbing team is available 24/7. If water has already reached walls or flooring, ask about leak detection to make sure nothing is hiding. For everything else, schedule service online or call (469) 214-2582, and ask about our current water heater coupon.
Water Heaters
Service area
Our trucks are in these neighborhoods every day, so help is close whether you call at noon or midnight.
What North Dallas is saying
Questions, answered
Don’t see your question? Call (469) 214-2582. Phones answered 24/7.
On gas heaters, a faulty thermocouple or flame sensor, pilot problem or gas valve is common. On electric heaters, a tripped high-limit switch, burned-out element or bad thermostat is usually to blame. Our free diagnostic pinpoints the cause before we quote a repair.
Lifespan depends on the heater, how it was installed, how much hot water you use and how often it’s maintained. Hard water shortens the life of many tanks by building up sediment. Yearly flushing and anode rod checks help a heater reach its full expected service life.
It can be. A drip from a fitting or valve is often repairable, but water coming from the tank itself means it is failing and can get worse quickly. Shut off the cold-water supply to the heater and call us; we’re available 24/7.
If the tank is sound and one part has failed, repair is usually the better value. If the tank is leaking, the heater is older or repairs keep adding up, replacement often makes more sense. We give you upfront pricing for both so you can decide.
With the hard water common across North Dallas, a yearly flush is a good rule of thumb. Flushing removes sediment that causes noise, slows recovery and wears out the tank. We can also check the anode rod during the same visit.
Yes. Attic installs need careful handling, a properly drained pan and correct venting so a future leak doesn’t damage the ceiling below. We’ll check access and code requirements during the diagnostic and include everything in the upfront price.
Tankless heaters provide hot water on demand and save floor space, but they cost more upfront and may need gas line, venting or electrical upgrades. They work best for households that want long showers back to back or need the space. We can price both options so you can compare.
Many straightforward tank replacements are finished the same day. Jobs that need venting changes, gas line work, an attic install or a conversion to tankless can take longer. We’ll give you a realistic time frame along with your upfront price.








