You may not realize it, but most of your time is spent in the bathroom. In fact, the average American homeowner spends at least 30 minutes each day in the bathroom. Unfortunately, the bathroom isn’t eco-friendly since it uses a lot of water and energy.
According to The Environmental Protection Agency, your bathroom accounts for at least 30 percent of your home’s indoor water consumption. Thus, it’s not surprising that the bathroom’s utility-related costs end up biting a huge chunk from your household’s budget.
The good news is that a professional plumber can help you have an eco-friendly bathroom for your home in Denton, TX. Here’s how.
Most bathrooms do not have sufficient lighting. You may want to consider replacing your standard bulb with a LED light, which is brighter and also saves energy. Adding lights around the mirror gives it a touch of elegance and fully illuminates the face without casting shadows.
Placing lights in the cabinet makes sure everything can be seen clearly. Adjusting the lights in the bathroom can instantly upgrade your space and doesn’t cost that much.
An important thing to consider changing in your bathroom is the faucet. Motion-sensing faucets activate the water flow when you place your hands underneath them and stop once you remove them. This reduces the risk of spreading germs and the need to clean them more often.
These smart faucets will also save you water and reduce costs, especially if you’ve children who can get distracted and forget to turn off the water. Some models also regulate the temperature to reduce the risk of burns. Touchless faucets, even though simple in appearance, contain more mechanical parts and should only be installed by a professional plumber.
Standard showerheads use around 2.5 gallons or more of water per minute. That’s nearly 40 gallons a day for the average family. Low-flow showerheads use 2 gallons per minute of water or less.
According to the Environmental Protection Agency (EPA), low-flow showerheads could save 2,700 gallons of water a year! While they use less water, the modern design of these fixtures includes increased pressure and enhanced spray coverage. Also, some can filter hard water. If you are interested in these latest showerheads, you can consult your plumber for the best products in Denton, TX.
If you’re looking to upgrade your shower experience completely, smart showers might be what you are looking for. Among the various features include:
- A timer that shuts off the water after a certain time.
- A thermostat that keeps the water at the same temperature.
- Different shower modes.
Some can be controlled remotely through your phone or by voice activation. You can program it to preheat water to a certain temperature simultaneously every day. Others have built-in Bluetooth speakers that let you listen to your favorite music or make calls. If you are only interested in a few features, there are separate devices that have some of those options.
Older toilet models consume at least three gallons of water or more for every flush. Federal standards require a flush volume of not more than 1.6 gallons. To reduce your water wastage, you can consider dual flush toilets with two flush options with different amounts of water for different types of waste.
High-efficiency toilets, or HET, utilize 1.28 gallons per flush and are more efficient in removing waste. A plumber can help you choose the right one among the many models and designs available. If you can’t afford to replace your current toilet, a plumber can show you a few water-saving adjustments you can make.
A plumber might recommend a smart toilet if you like fancy gadgets and features. Not only do they use less water, but they come with advanced technology, which makes cleaning easier. Some come equipped with seat warmers and deodorizers.
Others include bidets or washers that eliminate the use of toilet paper. Bluetooth speakers, automated toilet lids, and remote control are also available. If you do not want to replace the whole toilet, smart toilet seats have many of these features for a fraction of the price.
Gray water is wastewater from sinks, showers, washing machines, and dishwashers. Instead of wasting it, let a plumber install a system that lets you reuse gray water. If you are collecting rainwater, you can use that, too.
Doing this will reduce water costs and save the energy that would have been used to clean and filter gray water. Remember to check your local regulations in Denton, TX, before commencing a project like this.
Bathrooms usually have very cold floors, and the one heater doesn’t sufficiently heat the room. One way to solve that is with in-floor radiant heating. This heating system evenly distributes the warmth and makes the room more comfortable.
A thermostat will maintain the heat and only turn the heater on at specified times. The tiles retain the heat long after heating has stopped, thus, reducing energy costs.
Another thing you can do to upgrade your bathroom is to get a water tracker that tells you how much water you use around the house.
Also, you can consider a fogless smart mirror that comes with inbuilt Bluetooth speakers or a digital interface that lets you check the weather. To stay updated on the latest technology, you can ask your plumber for more information about new trends and smart devices.
Choose bluefrog Plumbing + Drain of North Dallas to Start Your Bathroom Upgrade Today!
The above strategies will give your bathroom a major eco-friendly facelift. If you want to create a more eco-friendly bathroom, you can contact bluefrog Plumbing + Drain of North Dallas to help you achieve it.
At bluefrog Plumbing + Drain of North Dallas, our plumbers are experienced in providing eco-friendly plumbing options that suit your modern lifestyle. Plus, we repair, install, and maintain all your plumbing fixtures and appliances. Please schedule an appointment with us today!