Tankless water heaters can provide Richardson, TX residents with a number of potential benefits. For example, they heat water as needed rather than keep an entire tank of water heated on a constant basis, meaning that they tend to use up less energy. Furthermore, less energy means a smaller energy bill, which in turn, means that they can make for household savings in the long run as well. Having said this, if Richardson, TX residents want such benefits, they need to choose the right option out of the tankless water heatersthat are available to them. Something that can be much easier said than done.
How Should You Go About Choosing from Tankless Water Heaters?
Here are some suggestions for how Richardson, TX residents can go about choosing from tankless water heaters:
Understand the Different Kinds
Of course, there are different kinds of tankless water heaters meant for use by different people under different circumstances. Generally speaking, interested individuals should know that that there are whole house units and point of use units. Like their names state, whole house units are meant to provide hot water for an entire home. In contrast, a point of use unit is meant to provide hot water for a single fixture.
Generally speaking, a whole house unit is better-suited for a smaller or medium-sized home. After all, one of the weaknesses of a tankless water heater is that it takes a bit of time for the water to heat up. As a result, when this is combined with the travel time for a bigger home, the result can be a very noticeable and very undesirable wait time for interested individuals. However, it isn’t unknown for bigger homes to have multiple whole house units installed in them, with each one being responsible for supplying hot water to a different part of the home. This takes up more space, but since tankless water heaters are tankless, the space requirements aren’t quite as bad as what a lot of interested individuals would assume upon initial consideration.
Moving on, point of use fixtures make excellent choices for fixtures that are expected to use up a lot of hot water because the increased rate of consumption justifies their presence. In fact, there are some people who choose to continue using a traditional water heater for most of their home while installing point of use units at select locations so that they can benefit from their increased convenience. However, it should be mentioned that there are also people who make use of both a whole house unit and one or more point of use units, particularly when they live in bigger homes that can reap more benefit from the extra sources of hot water.
Choosing Between Gas and Electric
The source of energy is an important consideration for choosing from tankless water heaters. Generally speaking, interested individuals can choose between gas-powered units and electric-powered units. both of which have their fair share of upsides and downsides. For instance, gas-powered units might be more powerful, but they tend to be out of favor for people who are concerned about their impact upon the environment. Meanwhile, electric-powered units can be better for the environment, but this is by no means guaranteed for the simple reason that electricity can be generated using a wide range of sources in a wide range of locations. In any case, there is one other point that interested individuals need to consider when choosing between these two options, which is whether the existing infrastructure of their home can actually handle the demands of these different options. After all, while the smallest point of use units should be sustainable by the standard electrical infrastructure, the same can’t be said for bigger units with the same sense of assurance. Moreover, when it comes to gas-powered units, interested individuals will also need to take into consideration how they are going to get the exhaust out because it is definitely not something that they want to be breathing in. As such, when people choose between these two options, they also need to consider the costs of any potential upgrades to their infrastructure that might be needed before said options become available to them.
Getting a Unit with Sufficient Capacity
Of course, interested individuals need to choose from tankless water heaters that can meet their hot water needs even when they are at peak use. Figuring out said figure may or may not be particularly difficult depending on interested individuals’ available documentation.
In short, interested individuals will want to add up the flow rate of the various fixtures in their home that will be making use of hot water. If they still have the documentation for their fixtures, chances are good that they will be able to find the relevant information therein. In contrast, if they don’t have said documentation, they have a couple of options remaining to them. One, if they know who manufactured the fixture as well as what the fixture is called, they might be able to get the relevant information from the manufacturer themselves. Two, if they have none of these sources available to them, there is still the option of going by the general flow for the fixtures of the same kind. Be warned that these figures won’t be exact but will instead come in a range. Most of them, interested individuals can expect older fixtures to be on the higher range of things and newer fixtures to be on the lower range of things. However, this isn’t universal, meaning that interested individuals need to consider margin for error for their assumptions.
Choosing from tankless water heaters can be a serious challenge. Fortunately, bluefrog Plumbing + Drain of North Dallas can be a very valuable source of relevant knowledge, meaning that interested individuals shouldn’t hesitate to contact us for the answers to their questions. For that matter, we are more than capable of installing such units in an effective and efficient manner for the peace of mind of our clients, which is one more of our professional services.