Photo By nikkytok at istock
Have you ever noticed that your water pressure slows down or doesn’t work the way you would expect when you’re taking care of any of your needs? Maybe you’re washing dishes or washing your car or even taking a shower. Or maybe you’re just washing your hands or rinsing off something in the sink. But if you notice that the water isn’t staying consistent or that it doesn’t seem as strong as it does other times you may be looking at some plumbing repair for low water pressure.
Check the Main Shutoff Valve
Before you call a professional for plumbing repair, make sure you check out the main shutoff valve. This valve makes sure water is able to get into your house the way it’s supposed to. If it’s open all the way then you’ll get the full flow of water, but if it’s partially closed you’re going to get less water into your home and that’s definitely not going to give you the water pressure that you’re looking for. So, look for the shutoff valve and see if it’s open all the way. If it isn’t, you just saved yourself a plumbing repair.
Check the Water Meter Valve
This is another valve that should be all the way open, but you want to be careful about this one. While you can take a look at it and see if the valve is open all the way or not, you shouldn’t change anything without talking to the city. If you do, you could face some penalties and that’s definitely not something you want. You need to talk with the local water department rather than just getting general plumbing repair for this type of problem.
Check the Hot Water Heater Valve
Here’s yet another valve that you can take a look at to make sure that the shutoff valve is not engaged. You want to make sure this valve is fully open to ensure proper water pressure. Keep in mind that this valve will affect not only your hot water but the cold water too. So if you’re noticing low water pressure in your cold water that doesn’t mean you should ignore the hot water heater. You still want to take a close look and get things taken care of.
Check the Aerator Screen
When you run your water through a faucet you may not notice that it’s actually coming through a screen. This screen has a bunch of holes that allow the water to pass through usually pretty unhindered. But if there’s a clog then you could see a drop in your water pressure. If you think this might be the problem this aerator screen can be removed and soaked in hot water and vinegar. Or you may need to have some plumbing repair done to fix or replace it if there’s too much damage or a big clog that you can’t get out.
Check the Pipes
Of course you need to check the pipes and the plumbing in general if your water pressure isn’t working. This could be something minor like a little clog or it could mean a major plumbing repair, but the sooner you get it taken care of the better it’s going to be for you. Make sure that you contact a repair professional in Denton, TX if you think that your water pressure is going down and you can’t find an obvious cause. They’ll be able to take a closer look at things like clogged pipes or even corrosion that can affect your pressure.
Check the Pressure Regulator
Pressure regulators are relatively new but they are required in many areas. As they get old, however, or if they stop working properly, they can change the water pressure more than they should. You may actually notice that your water pressure gets a lot higher or that it gets a lot lower. Either way, you want a repair professional to take a look and do what they can to fix the problem. They can replace the regulator or repair it to get your water pressure back where it should be.
Check for Leaks
Of course, one of the biggest things that could cause you to lack water pressure is a leak somewhere in your home. You definitely don’t want to deal with a leak but if you have one then getting plumbing repair as soon as possible is crucial. That’s how you’re going to get it resolved before it becomes an even more serious problem. Leaks that aren’t taken care of can get even more serious and become an even bigger problem, especially if they’re leaking behind the walls where you can’t see them.
Check with the Water Department
If you’ve talked to a plumbing repair specialist and you’ve checked out all of these things then talk to your water department. They may be able to tell you what’s going on or if the water pressure problem is a city problem. If that’s the case there may not be a whole lot you can do until the city takes care of the problems on their end. Still, at least you’ll know what’s going on and you don’t have to worry about whether there’s a problem in your home. You can feel confident that everything is going to be just fine.
When you’re ready to take care of any kind of plumbing repair in your Denton, TX home, make sure you know who to call. bluefrog Plumbing + Drain of North Dallas can help you get the plumbing services that you need. Whether you need something minor or you’re in need of serious repairs, we can help you get it taken care of quickly and easily. All you need to do is make sure you’re giving us a call right away. Schedule an appointment with our team to make sure your repair needs aren’t going to be a problem for you anymore. And your water pressure is going to be back where you want it.