Water Heater Problems: Tips From A Professional Water Heater Installation And Repair Technician | Richardson, TX
Compared to several other plumbing system issues, water heater issues usually are easy to detect and pinpoint because of several apparent signs. When you open the shower or faucet and only get an icy response, that is a sign that something is amiss with the water heater. Or you probably hear some sounds within the water heater or see water pools near your water heater. So, what should you do if you have a water heater problem?
Determining the problem can help you decide whether it is time to call a professional water heater installation or repair technician in Richardson, TX, for assistance. Never try any DIY plumbing repair project at home, mainly repairing the water heater, regardless of how comfortable you are with your DIY skills if you are unlicensed. Below are some of the common problems your water heater may experience and how a plumber can help you resolve them.
Your Home Doesn’t Get Enough Hot Water
Do you always run out of hot water before you are through with your shower at home? There is a high likelihood that the load is too big for your water, meaning you have a smaller water heater to accommodate your needs. You might either purchase a tankless water heater or invest in a larger unit, with the former never running out of hot water because it heats it on demand.
However, if the water heater does not produce hot water as before, it has another underlying issue. Begin by checking the unit’s temperature dial and adjusting the temperatures to the required levels. If there is no difference after you’ve raised the dial, the problem might be even more complex. Enlist the help of a professional water heater installation and repair technician to inspect the water heater and diagnose where the problem lies. They will then resolve the issue, ensuring that your home gets a continuous hot water supply.
The Water Smells Bad or Is Discolored
When the hot water smells or has an unusual hue, the first thing to look for is if the problem is with your water supply or the water heater. Turning on the faucets containing cold water alone is a simple way of checking this. But, if the cold water also has a strange smell, the problem is not with the water heater, but rather with your water source.
If only your hot water has a foul smell, it’s most likely because of a reaction between a high sulfate concentration and the anode rod. Leave the water running for several minutes and then smell it. If you get a sulfur-like odor, enlist the services of a water heater installation or repair technician to flush your water heater tank. If the odor persists even after flushing the tank, you might need the anode rod replaced by a certified Richardson, TX plumber.
Some homeowners who use a gas-powered water heater do not detect a sulfur-like odor but rather a garlic smell. This is usually a sign that the heater’s pilot light has turned off. Please turn off the valve control before you relight it. Relight the pilot when the odor is no longer as strong.
If the odor persists, close the gas supply, ventilate that space, and leave immediately. Call your gas company plumber close to your home to inspect the water heater and diagnose any underlying issue. They will perform various water heater installations and repairs on your unit, ensuring your home has a continuous supply of this vital resource.
The Dispensed Water Is Too Hot
Before doing anything else:
- Ensure that you lower the temperature dial found at the front of your water heater.
- Use a permanent marker to mark that setting.
- Come back after a few hours and check whether the temperatures have changed.
If it hasn’t, listen to the water heater tank for boiling sounds.
If such a thing happens, it generally means that the water doesn’t stop the heating process at those set temperatures. This might also mean the temperature and pressure relief valve is causing the issue. The T&P release valve is essential for releasing the steam pressure building inside the water heater tank.
Regardless of the issue, you might be injured by the scalding steam or water. Contact a professional water heater repair technician to inspect your unit. They will let the water cool completely and then remove the temperature and pressure relief valve and replace it with a new one. The professional plumber has the required training and equipment to handle water heater installation, maintenance, flushing, and repairs. They will safely repair the unit by changing the damaged part. Remember, never attempt DIY water heater repair. It might seriously injure you, result in even more significant issues, or void your warranty.
You Have a Leaking Water Heater
You should look for a puddle of water nearby if your water heater leaks. A leaking valve or the water heater’s tank itself could be the source of the leak. It may not be a leak but rather a gathering condensation.
Try figuring out the source of the leaks. If there’s a leak, you should see the water dripping. The water in the tank indicates the metal has rusted and isn’t any longer safe for use. You might wish to have it replaced by a local plumber.
Turn off all the water outlets before you continue if the tank is intact and spot a leak on the pipe fittings or pipes. You can temporarily fix the issue with a pipe clamp as you wait for a professional plumbing technician to arrive.
Now is the time to consider whether you’re comfortable replacing the damaged pipes or taking the pipes apart. Enlist the assistance of a qualified and licensed water heater installation or repair technician or a plumber to help with patching the leaks.
The Water Heater Makes Strange Noises
Do you hear some odd sounds emanating from the water heater? Accumulation of sediments in the water heater or the expansion and contraction of the water heater may be the cause. The mineral deposits might accumulate on the heating elements or in the tank. When they are heated, the minerals crystallize, resulting in scale that makes the interiors of the water corrode. This reduces the efficiency of your water heater and might break down the unit.
You can reduce the number of mineral deposits on your water heater using various mechanisms like water softening solution. Enlist the services of an experienced water heater installation or repair technician to be flushing the water heater once or twice a year.
Reliable Water Heater Installation and Repair Technicians
For Licensed and experienced water heater installation and repair technicians you can trust in Richardson, TX, choose bluefrog Plumbing + Drain of North Dallas. Our plumbers are on standby 24/7. Whether water heater installation, replacements, or repairs, we are here to help. Call us today for a free estimate.
Priority Service