Hire A Pro For Your Water Heater Installation Instead Of DIY | Richardson, TX
Your home’s water heater is not designed to last forever. Therefore, there will come a time when you will need to replace it. The average lifespan of a water heater ranges between ten and fifteen years, and therefore, if you have used your water heater for more than a decade, it is time for you to start thinking about replacing it. If you are not sure about the age of your water heater, you can ask a professional water heater installation expert to help you determine when your water heater was installed.
In any case, the efficiency of water heaters deteriorates as they age, meaning that older water heaters can be more expensive to run. Besides, if your water heater is over a decade old, it might start breaking down more frequently, which might cause serious inconveniences in your Richardson, TX home and cost you a lot of time and money in repairs. Therefore, if you are convinced that your water heater is approaching the end of its lifespan, then you can benefit immensely by getting it replaced. However, it is worth noting that no matter how much you like getting your hands dirty around your house, DIY water heater installation is not something you should fancy trying. Below is a rundown of the reasons we believe DIY water heater installation is a terrible idea.
You Might Choose the Wrong Size of a Water Heater
A successful water heater installation job begins with choosing the right size of a water heater. This should be determined by the size of your household or your demand for hot water. If you make the mistake of choosing a water heater that is too big, it might end up consuming more energy than necessary. On the other hand, if you pick a water heater that is too small, it might be impossible for your house to get a constant supply of hot water. To prevent such an eventuality, it is imperative for you to ensure that you work with a professional plumber from the word go. These professionals deal with water heaters every day, and they have a way of calculating the optimal size of a water heater to invest in, depending on the needs of any particular household. Therefore, by leaving the job to professionals you can rest assured that the water heater you invest in will meet or even exceed your expectations.
The Job Is Not Safe
Another reason to avoid DIY water heater installation has to do with safety. Indeed, installing a water heater is a physically demanding job that might leave you with severe physical injuries, especially if you do not have the right tools and skills for the job. For instance, the job might involve handling some electrical issues, which might expose you to the risk of electrical shocks or electrocution. Besides, if the gas or propane hoses are not connected correctly, they can put your Richardson, TX home at the risk of catching fire. To prevent such eventualities, it is imperative for you to get a licensed plumber to install your water heater. Professionals handle such tasks almost every day, and they know what needs to be done to ensure that your water heater is installed in a way that does not put your family or your home in danger. In other words, by hiring a professional water heater installation expert, you can rest assured that the job will be done in the safest way possible.
The Job Might Not Pass Inspection
Due to the risks associated with running a water heater, water heater installation is a highly regulated job. For instance, you need a plumbing permit to install a water heater in Texas. This is meant to ensure that the safety code placed by local authorities is easily enforceable. Once a water heater has been installed, authorities might send inspection officers to determine if the job was done correctly. Unfortunately, unless you are a professional plumber, it is unlikely for you to be familiar with the regulations surrounding water heater installation. Therefore, if you decide to try DIY installation, you are very likely to make mistakes. Therefore, it is unlikely that your work will pass inspection, meaning that you might eventually be forced to call a professional plumber to get the job done correctly. Unfortunately, getting the job redone by a professional means that the entire project is going to cost you much more than you expected. To prevent such an eventuality, it is imperative for you to work with a professional water heater expert from the word go.
You Might Void the Warranty
Water heaters are quite pricey appliances. This explains why ordinarily come with warranties. If your water heater has a warranty, you might benefit from free repairs if your water heater breaks down within the time stipulated in the warranty. However, warranties usually come with conditions. For instance, for your warranty to remain valid, your water heater might need to be installed by a licensed plumber. In such a situation, if you try to install your water heater on your own, you might void your warranty. This means that you might end up losing all the privileges that your warranty affords you. To minimize such risks, you need to ensure that your new water heater is installed by a professional plumber.
The Bottom Line
Overall, it is apparent that if you need to install a new water heater, you have to ensure that the job is done by a professional plumber. This is because DIY water heater installs can be risky, and it might lead to big financial losses. If you are looking for a dependable plumber providing water heater installation services in Richardson, TX, bluefrog Plumbing + Drain of North Dallas is a perfect plumbing contractor to consider. We have been installing water heaters for many years, and our reputation is above board. Feel free to contact bluefrog Plumbing + Drain of North Dallas to learn more about our company and services.
Priority Service