Plumber Tips: Should You Worry About High Water Pressure In Your Home? | Denton, TX
Photo By Koldunova Anna at Shutterstock
One of the issues associated with high water pressure is the amount of water that you waste — we’re talking about gallons of water wasted, which can result in skyrocketing water bills. For example, you can waste up to 12 gallons of water every 5 minutes using the faucet or the shower. To avoid problems, the water pressure in your home should be at normal levels. This article will talk about high water pressure and why it’s not good for your plumbing system. Should you have questions, please don’t hesitate to contact a licensed plumber in Denton, TX.
Can high water pressure damage my plumbing?
Ideally, the water pressure in your home should be between 45 and 55 PSI. It’s already considered high when above 55. Failure to address high water pressure problems can lead to issues such as pipes bursting, annoying sounds in the pipes, and reduced lifespan of your appliances and pipes. If you have high water pressure, please immediately contact a professional for assistance.
Signs of High Water Pressure
Below are some signs that you have high water pressure:
You know that you have high water pressure when the pipes make loud noises when turning on the tap or the shower. Please address the problem right away to avoid costly repairs down the road.
Is your toilet always running? That’s another indication that you have high water pressure in your home. Again, it’s best to contact a plumber so they can check your water pressure and help you alleviate the problem.
Because high water pressure can strain the pipes, it may also cause your faucets to leak water. You can avoid this by regulating the water pressure in your home. Contact a licensed professional at the soonest possible time to help you resolve the problem.
Unusually Higher Bills
If you’ve not been using a lot of water but your bills are higher, there might be a leak in your plumbing, or your water pressure is too high. Please reach out to a licensed plumber for professional leak detection and ensure that your water pressure isn’t too high. Otherwise, you’ll have even bigger problems.
What To Do When High Water Pressure Damages the Pipes
We’ve already mentioned that high water pressure can puncture the pipes. If you don’t regulate the water pressure in your home, it won’t be long before you call an emergency plumber in Denton, TX, and it’s going to cost you a fortune in repairs if you don’t do something at the earliest possible time.
If your pipes have already burst, please turn off the shut-off valves immediately to stop the flow of water to the pipes and prevent further damage to your plumbing system. After shutting off the valves, you need to drain the faucet and call a plumber right away for assistance. bluefrog Plumbing offers 24/7 emergency services, which means you can contact us at any time. Whether it’s in the wee hours of the morning, our team will be there for you. We can also quickly dispatch a licensed plumber to help you resolve your problem promptly and avoid more damage to your plumbing system.
After contacting a plumber try to locate the damaged pipe and see if other pipes are severely damaged by high water pressure. You may see puddles of water near them or water spots in the ceilings or walls. It’s also important to dry the area to prevent mold growth. If possible, get help from a professional to ensure everything is taken care of.
What About Low Water Pressure?
Low water pressure may not entirely damage your plumbing, but we’re afraid to say that they may indicate an issue with your plumbing system. It could be a sign that there is a leak somewhere in your plumbing, and you need to get that repaired immediately to avoid further problems. Contact a plumber for professional leak detection if you can’t find the leaks.
If the low water pressure only comes from one tap, the problem could be a clogged aerator. In that case, you simply clean it and reattach it. Contact a professional if you don’t know how to unscrew and reattach the fixture.
A sediment buildup in your water heater tank can also lead to low water pressure and affect the efficiency of your unit. You need to flush out the mineral buildup to remedy the problem. If it’s not resolved, then contact a professional near you.
Do you already have a pressure regulator installed? Then it might be faulty. Get help from a professional to help you determine if it’s time to get a water pressure gauge.
If you’re not sure there’s a leak in your plumbing, try doing the water meter test. Turn off all the taps and showers and check your water meter. Please take note of the figures that you see there and come back to them after an hour. Please make sure that no one else uses the bathroom or laundry room. If the readings have changed, there is a leak somewhere in your plumbing. Contact a professional to help you alleviate the problem at the soonest possible time.
Call bluefrog Plumbing + Drain of North Dallas
Do you need a plumber for your home in Denton, TX? You can call us at your earliest convenience, and we’ll make sure you get the help you need. We’re quite efficient and skilled with any plumbing repairs and installations. Our team of licensed professionals are also fully equipped — if other issues come up, there’s no need to set up another appointment as we will resolve the issue on the same day. Also, we’re consistent with providing exceptional services on every appointment because your satisfaction is always a top priority.
In addition, we can also help with plumbing maintenance and installations. Or, if you need help deciding what water heater or dishwasher to purchase, our team can help too. Please call us today for an appointment.