Photo By unclepodger at istock
Plumbing issues can spring up at any time. Some of the problems are minor and will cost you zilch if you’re able to handle them on your own. However, others are major and impossible to fix by the average homeowner. In such instances, only an expert plumber can solve the problem.
Below are the most common plumbing issues you’ll come across and how to resolve them.
1. Low Water Pressure
If water from your taps dribbles rather than spurts out, that’s a clear sign there’s a plumbing problem. This is common in older homes. Low water pressure occurs as a result of the following reasons:
- Hidden water leaks in your home due to worn-out or corroded pipes cause reduced water pressure because a lot of water is lost on its way to the tap. In turn, this increases your water bill.
- If both your hot and cold faucets produce water at low pressure, it’s likely because of residue buildup in your aerator. If this is the case, carefully take off the aerator and soak it in vinegar to clean it.
- If your showerheads produce water at low pressure, soak them in vinegar for cleaning, but the quickest solution would be to replace them.
Changing or cleaning your aerator or showerhead can be a challenging job. Therefore, it would be best to contact your local plumber in Carrollton, TX.
2. Dripping Faucets
The sound of a dripping faucet is very irritating and can keep you up all night. It not only annoys you but will also increase your water bill.
So, if you tighten your tap to the point that opening it is difficult and you still notice drops of water, the cause could be a worn-out or dislodged internal washer. Fixing this is often considered by most challenging, but this won’t be a challenge to the best plumber in Carrollton, TX.
3. Clogged Drains
Clogged drains are more often a problem in the bath or shower drain. Clogs of hair and soap are what generally cause the blockage. Unblocking this requires the use of a plunger, but if the situation seems tougher to resolve, the right tool to use would be a drain snake. Using baking soda and vinegar could sometimes do the job.
Ignoring the situation only makes matters worse. You can minimize or prevent the chances of blocking your drain by buying a drain guard to filter waste materials. If, after unclogging the drain, the problem persists, contact your local professional.
4. Water Heater Issues
Water heater issues are not easy to notice until you turn on the hot water in your shower and it pours down cold water. Several factors could cause a water heater to fail, including a faulty thermostat, sediment buildup on the heating element or a blown pilot light that needs fixing.
Fixing most of these issues on your own could be a very challenging task. You may adjust the temperature settings on the thermostat and unknowingly set the temperature high, leading to some catastrophic injuries.
The best thing to do would be to contact your local plumber and have them look into the matter.
5. Running Toilet
A running toilet is a common problem in many households. What many don’t know is that a running toilet can waste up to 200 gallons of water each day.
It’s commonly caused by a faulty flapper valve that controls the amount of water passing from the tank to the toilet bowl. Fixing this isn’t much of a challenge because all you need is a toilet repair kit available at almost every hardware store.
Sometimes toilet runs could be caused by silts interfering with the flush and fill mechanism. If this is the case, contact your local plumber and have them fix the issue.
6. Jammed Garbage Disposal
Because food remains and waste go into the garbage disposal, it’s bound to clog. Disposing certain food debris such as potato peels, running them without water or accidentally dropping in silverware are the main causes of jammed garbage disposals.
To fix this, first hit the reset button, and if this doesn’t work, you’ll need to open up the garbage disposal. All garbage disposals come with a key that opens, but if you’re like most people who lose the key, a ¼ Allen wrench will do the trick. Simply turn the wrench in both directions to free the motor.
If you lose the key and have no access to a ¼ Allen wrench, it wouldn’t be a smart idea to use other tools to lead to further complications. The best thing to do is to contact the nearest plumber.
7. Slowly Draining Sink
A slowly draining sink is the most common plumbing issue. Often it occurs as a result of the pop-up used to stop up the sink collecting too much hair, congealed fats and food remains. This is easily fixable because all you have to do is clean the pop-up.
To clean it, you need to use a Zip-It. Slowly push the Zip-It down the drain to the furthest point possible and pull it back out. You’ll be surprised by the amount of waste materials that were in your drain.
You could also decide to clean it the old fashioned way by manually removing the pop-up and cleaning it yourself, then reinstalling it.
If, after doing this, the sink still drains slowly, contact your local plumber.
Contact the Best Plumber
Whatever your plumbing issue is, it’s essential to consider that some matters are best left to a professional plumber. Whether it’s your drain, toilet or pipes, you can rely on bluefrog Plumbing + Drain of North Dallas to fix it. We have a team of trained and licensed professionals that can handle all your plumbing issues. Contact us for the best plumbing services in the area today!